Stone Veneer Fabric Panels

Copper

Silver Shine

Gold Green

Multi Color

VERSALITE STONE® FABRIC TECHSHEET

• SIZES:
  Standard Size is 36″ x 96″ (special sizes are also available on request).
• THICKNESS:
  0.7 – 1.0 mm (depending upon the stone).
• WEIGHT:
  900-1100 grams per square meter or .18 – .25 lbs. SF (depending upon the stone).
• COMPOSITION:
  VersaLite Stone® Fabric is natural stone veneer laminated to a fabric substrate.
• APPLICATION:
  VersaLite Stone® Fabric offers an even wider range of opportunities in use because of its extreme flexibility and uniqueness. The material can be can be applied on various substrates: Walls, Ceilings, Interiors, Furniture, Cabinets, Doors, etc. (Not suitable for floors or exterior use)
• TOOLS:
  Standard tools can be used for application. Fabric can also cut with a carpet knife or sharp scissors.
• SEALING:
  VersaLite Stone® Fabric requires sealing for stain and scratch protection. The sealers recommended are listed on this document. It is best to pre-seal VersaLite Stone® Fabric sheets prior to installation. This protects and seals the face from scuffing, adhesives and grout during installation and handling.
• VARIATIONS:
  Since VersaLite Stone® Fabric is a natural product DESIGNED BY NATURE, color and texture variances are not defects within the material, but are inherent to it and part of the natural beauty of quarried materials. These materials cannot be guaranteed to match dye-lot to dye-lot, so it is recommended that orders take into account future maintenance or re-fit possibilities.
• STORAGE:
  VersaLite Stone® Fabric sheets should be stored flat in a clean environment.
• PRECAUTIONS:
  Precautions must be taken when working with VersaLite Stone® Fabric due to the fiberglass composition of the backing materials. ALWAYS use the proper gloves, goggles, and dust mask when working with VersaLite Stone® Fabric. Industry standards recommend a NIOSH/MSHA approved respirator for this type of material. When using a saw ALWAYS be sure to take proper precautions to cover skin and eyes from fiberglass dust. When cutting VersaLite Stone® Fabric with saws, grinders, or sanders, ALWAYS properly filter and exhaust equipment.
• AVOID BREATHING SILICA DUST:
  This product when cut, drilled, or abraded produces dust containing Free Silica which may cause cancer or delayed lung injury (Silicosis) if inhaled. Work outdoors, in a well ventilated area, or use mechanical ventilation. Please wear safety glasses and a dust mask. If working in dusty areas or where airborne dust exceeds PEL wear NIOSH/MSHA approved respirators. This product contains one or more chemicals known to the State of California to cause cancer.
• FIRST AID MEASURES:
  (Under normal condition) Inhalation: no specific measure to be taken.
  Skin Contact: no specific measure to be taken.
  Eye Contact: no specific measure to be taken.
  Ingestion: no specific measure to be taken.
• MEASURES IN CASE OF FIRE:
  Suitable extinguishing media: dry extinguishing media, foam, CO², water spray risk by gas: in case of fire carbon monoxide and carbon dioxide can be produced special protecting equipment: no special measurements necessary.
• MEASURES IN CASE OF ACCIDENTAL SPILLAGE:
  Not applicable
• EXPOSITION RESTRICTION AND PERSONAL PROTECTING EQUIPMENT:
  No specific measures – while processing the material we recommend wearing safety glasses.
• CHEMICAL AND PHYSICAL PROPERTIES:
  Appearance: solid (color of the product as supplied).
  PH: not applicable.
  Boiling Point: not applicable.
  Melting Point: not applicable.
  Decomposition Temperature: > 300°C.
  Flash Point: not applicable.
  Flammability: not easily flammable.
  Explosive Properties: not applicable.
  Oxidizing Properties: not applicable.
  Vapor Pressure: not applicable.
  Relative Density: not applicable.
  Solubility in Water: insoluble.
• TOXICOLOGICAL INFORMATION:
  No toxic reaction known under normal conditions.
• ECOLOGICAL INFORMATION:
  For transportation, storage, normal use, no toxicological effect known.
• DISPOSAL CONSIDERATIONS:
  Product can be deposited with normal waste according to local restrictions.
• TRANSPORT INFORMATION:
  Fabric sheets are packed into wooden pallet, roll or box and can be transported by LTL, Air or Sea.