Installing Thin Stone Veneer

High quality, thin stone veneer panels are light and flexible, making them perfect for your next interior or exterior project.


Adhesives for VersaLite Stone Veneer

Litoelastic Epoxy-Polyurethane

EpoxyÉlite EVO

Litoelastic Epoxy-Polyurethane

Litokol Litoelastic EVO

Boss Adhesive for Thin Stone Veneer

Boss Adhesives

Sealers for VersaLite Stone Veneer

Hydrolux EVO Sealer for Natural Thin Stone Veneer

Hydrolux EVO Sealer for Natural Thin Stone Veneer

Learn More at Design Tile


  • VersaLite Stone Veneer is stocked in 2′ x 4′ and 3′ x 9′ panels; Interlocking Panels, Ledger, and 2″ x 4″ Mosaics.
  • Sizes can be produced as per customers requirements also.
    2.0 mm (depending upon the stone).
    1500-2000 grams per square meter or .30 -.40 lbs. SF (depending upon the stone).
    VersaLite Stone Veneer is natural stone veneer laminated to a polyurethane resin substrate.
    Installation of VersaLite Stone is quick, simple and easy. Simply apply the proper adhesive to the back of VersaLite Stone Veneer sheet with the proper sized trowel for the substrate and mount the sheet in place. Starting in the center of the sheet, using a roller or hand pressure, work any trapped air out towards the edge of the sheet. After adhesive has cured, you may finish the edges with grout or trim pieces to match or accent the given decor.
    VersaLite Stone Veneer can be used in many of the same applications as other thin laminate products are used. It will bend to a small radius depending on the stone color or type. With the assistance of heat, smaller radius can sometimes be achieved. Testing should always be done prior to any installation. VersaLite Stone Veneer can be bent inward or outward to meet a given look or architecture. Fiberglass strand is used in the makeup of VersaLite Stone Veneer, which gives it superior strength and flexibility.
    VersaLite Stone Veneer may require sealing for stain and scratch protection depending on the product and how it is intended to be used. The Ultraflex Natural Thin Stone Veneer panels come pre-sealed. If any of the VersaLite Stone panels are to be used in wet applications or as flooring, it is recommended that they be sealed using Litokol’s Hydrolux. It is best to pre-seal VersaLite Stone Veneer sheets prior to installation. This protects and seals the face from scuffing, adhesives and grout during installation and handling.
    Before application it may be necessary to clean, brush, or degrease any surface of dust or oils. In some installations, depending on the adhesive used, it may be necessary to prep the back of the VersaLite Stone Veneer by sanding or scuffing. Follow the instructions for each adhesive on the label of the product, or the technical sheet that applies to each.
    Preparation of the area to be covered and the layout of the VersaLite Stone Veneer sheets is the same as for natural stone or tile. Time spent preparing the work area will pay off immensely. A preliminary dry fit of VersaLite Stone Veneer allows for arrangements and orientation of individual sheets, patterns, textures, and colors before final placement. It is recommended that each sheet be dry fit exactly where it will be placed on horizontal or vertical surfaces. Numbering the sheets to track relocation before cutting and trimming is recommended and will save time.
    Cutting straight lines and curves can best done using long nosed tin snips. VersaLite Stone Veneer can also be cut with a metal shear, wet saw, or table saw with carbide blade.
    It is important to follow exact guidelines for the chosen adhesive; by understanding the specifics of the adhesive, a great deal of time and cost can be saved. All adhesives should be selected prior to the installation taking into account important factors such as moisture and temperature in the planned environment. If the application is outdoors, consideration to thermal expansion needs to be taken into account. Since VersaLite Stone Veneer is a veneer it must expand and contract with the substrate or delamination may occur.
    The back of VersaLite Stone Veneer may require “Back-Buttering” of adhesive for some applications. For wet environments, epoxy adhesives are required. Contact adhesives are not recommended due to the uneven backing of VersaLite Stone Veneer. Do not use non-catalyzing (water vapor type) cure adhesives where the substrate is a moisture barrier. Adhesive may not adhere properly if applied between non-porous materials.
    VersaLite Stone Veneer can be worked with any commercially available tools. Sawing, drilling, milling, cutting, bending, pressing. For industrial processing we recommend using diamond blade tools due to strong wear on wood blades.
    A hand roller is recommended to remove air between the VersaLite Stone Veneer sheet and substrate. To properly roll out trapped air, start in the middle of a sheet while firmly rolling to the edge. Do not press too hard while rolling as this may cause back-filled areas to push adhesive out and leave an air void. Proper back-filling and good rolling techniques will result in a solid, hard surface.
    VersaLite Stone Veneer can be used to create a tiled effect by leaving a grout joint between cut pieces. Sheets may also be butt-jointed for the look of a smaller seam. Due to the thin nature of VersaLite Stone Veneer a 1/8″ to 1/4″ grout joint will produce better results. When using grout joints, STARLIKE or X90 Epoxy based adhesive that will also serve as the grout is recommended. The adhesive will become the grout joint material when flattened out where joints will be prior to placement of stone sheets.
    We strongly recommend to seal the stones surface with the recommended sealers before installation. Modified grout and caulking grout can also be used to grout the joints after adhesive set.
    VersaLite Stone Veneer has a natural, split rough surface with a tolerance up to 2 mm. While being applied and during adhesive setting times, you can address thickness variations by applying pressure, tape and or weights to areas to keep stone in firm contact during adhesive drying.
    VersaLite Stone Veneer can be applied to MDF, HDF boards, Styro -Foam sheets, melamine, brick, concrete blocks & slabs, mortar plastered walls, drywall, plywood, acrylic or other plastic sheets. In some indoor and most outdoor applications expansion and contraction must be equal to prevent delamination. A flexible adhesive may be considered in this case. Concrete and masonry substrates must be at least 28 days old. Hydrostatic pressure conditions and vapor transmission cannot exceed 3 lbs. per 1,000 sq. ft. (1,36 kg per 92,9 m2 ) per 24 hours using a calcium chloride test (reference ASTM F1869), and retained moisture should be less than 2.5%.
    Since VersaLite Stone Veneer is a natural product DESIGNED BY NATURE, color and texture variances are not defects within the material, but are inherent to it and part of the natural beauty of quarried materials. These materials cannot be guaranteed to match dye-lot to dye-lot, so it is recommended that orders take into account future maintenance or re-fit possibilities.
    The stone surface of VersaLite Stone Veneer, like most stone elements, acts as a UV inhibitor and will resist high sun conditions for years. When adhered to a substrate, VersaLite Stone Veneer will handle thermal contraction and or expansion of most standard construction materials.
    VersaLite Stone Veneer will handle both, – high temperatures and freezing without cracking.
    The storage of unsealed VersaLite Stone Veneer material must be dry, preferably frost-free and sun Protected. Protect against climatic influences.
    Precautions must be taken when working with VersaLite Stone Veneer due to the fiberglass composition of the backing materials. ALWAYS use the proper gloves, goggles, and dust mask when working with VersaLite Stone Veneer. Industry standards recommend a NIOSH/MSHA approved respirator for this type of material. When using a saw ALWAYS be sure to take proper precautions to cover skin and eyes from fiberglass dust. When cutting VersaLite Stone Veneer with saws, grinders, or sanders, ALWAYS properly filter and exhaust equipment.
    This product when cut, drilled, or abraded produces dust containing Free Silica which may cause cancer or delayed lung injury (Silicosis) if inhaled. Work outdoors, in a well ventilated area, or use mechanical ventilation. Please wear safety glasses and a dust mask. If working in dusty areas or where airborne dust exceeds PEL wear NIOSH/MSHA approved respirators. This product contains one or more chemicals known to the State of California to cause cancer.
    Product can be deposited with normal waste according to local restrictions.
    Sheets are packed into wooden pallet or box and can be transported by LTL, Air or Sea.

Natural Thin Stone Application Ideas

Our thin stone veneer is perfect for a wide range of projects. Here are some inspiring ideas to help you envision how it can transform your space:

Thin stone veneer facade

Exterior Facades

Enhance your home’s or business’ curb appeal with a stunning stone veneer facade. It adds texture and dimension, creating a lasting impression.

Thin Stone Veneer Fireplace Surround

Fireplace Surrounds

Create a cozy focal point in your living room with a beautifully crafted stone veneer fireplace surround. It brings warmth and character to the heart of your home.

Natural Stone Veneer Accent Wall

Feature Walls

Add a touch of luxury to any room with a striking stone veneer accent wall. Whether it’s behind your bed, in the dining area, or as a backdrop in the living room, it elevates the overall aesthetic.

Natural Thin Stone Veneer for Bathrooms


Natural thin stone veneer is durable and resists water make it an excellent choice for maintaining both beauty and functionality in damp environments.

Thin Stone Veneer Kitchen Backsplash

Kitchen Backsplashes

Upgrade your kitchen with a durable and stylish stone veneer backsplash. It not only looks great but also provides a practical, easy-to-clean surface.

Thin stone veneer facade

Outdoor Living Spaces

Transform your patio, garden walls, or outdoor kitchens with the natural beauty of stone veneer. It creates a seamless transition between indoor and outdoor living areas.

Thin stone veneer facade


Easily wrap columns with flexible thin stone veneer.

Natural Thin Stone Veneer Flooring


VersaLite Stone can be used as flooring in light residential settings sealed with Hydrolux, a specialized sealer top coat that adds additional strength.

Buy VersaLite Stone Today!

Elevate your space with the timeless beauty of natural stone veneer. Browse our stunning collection and transform your home or business with unparalleled elegance and durability!